Optical DVI ExtensionsOpticis DVI products consist of a transmitter having 850nm VCSEL array inside and a receiver having PIN-Photo Diode array inside. They support WUXGA(1,920x1,200) graphic resolution at 60Hz refresh rate. |
 Opticis 1-Fiber Detachable DVI Module, SC (DVFX-110)
Opticis new 1-fiber detachable DVI Extender, DVFX-110 is easy to connect to your existing system, giving you and your customers the confidence that you have the best solution in the market. DVFX-110 is capable of driving uncompressed WUXGA (1920x1200) 60Hz DVI signal up to 1,000m (4920 ft) over one (1) SC single-mode or 500m (1640ft) over one (1) SC multi-mode fiber.
Part Number: DVFX-110-TR
|
|
|
 Opticis Four-Fiber Detachable DVI Extension Module (M1-201SA)
The M1-201-SA is a high-quality, uncompressed data link between a host processor video card and a display peripheral. Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems. The four (4) optical data, Red, Green, Blue and clock can be extended up to 500 meters (1,640ft) over LC duplex multi-mode fiber cables (two sets) at WUXGA (1,920x1,200) at 60Hz vertical refresh.
|
|
 Opticis Optical DVI Dual Link Extension Module (M1-3R2VI-DU)
The M1-3R2VI-DU DVI Module is a new member of the Opticis family of products that stretches your DVI connectivity. It offers a fiber-optic long-distance extension of dual link DVI connectors. DDC connection is implemented over a CAT5e cable with RJ-45C.
The reality of high-speed digital graphic interconnections mandates products to maintain video quality and cost effectiveness of integrated display systems. Optical technology for gigabit digital transmission makes it simple to extend digital graphic data above the extension limits of copper wires providing pure signal integrity for an ideal visual experience, no EMI/RFI emissions, light weight, rugged cabling and connectors, low power consumption and installation ease.
|
|
 Opticis Optical DVI Dual Link Extension Module (M1-2R2VI-DU)
The M1-2R2VI-DU is designed to be used with high resolution Dual link DVI source and large panel display, such as 30 inch apple cinema display (2,560X1,600). It performs DDC/HDCP interconnection over CAT5 with R-J45 connector and transmits Dual link DVI graphic sources over four duplex LC patch cord up to 100m.
Part Number: M1-2R2VI-DU
|
|
 Opticis Optical DVI Extension Module (M1-2R2-TR)
M1-2R2-TR is designed to enable the DDC/HDCP parameter control and power management interconnection through RJ-45C UTP copper cable with digital data gigabit over two duplex LC patch cord fibers up to 100m.
|
|
 Opticis Express All-Fiber DVI Cable - 10m/33ft (M1-1000-10)
The Digital Visual Interface is a high-quality, uncompressed data link between a host processor video card and a display peripheral. Optical technology for this transmission stretches the performance beyond the limitations of copper wire with longer length, data security, negligible RFI/EMI and the elimination of costly analog distribution systems.
Length: 10 meter / 33 feet
Part Number: M1-1000-10
|
|
 Opticis Point to Point Hybrid DVI Cable - 10m/33ft (M1-1P0E-010)
The M1-1P0E-010 DVI extension cable is a new member of the Opticis family of products that stretches your digital visual interface connectivity. The M1-1P0E-010 is a hybrid cable solution using four H-PCF (Hard-Polymer Clad Fibre) or multi-mode glass fibers for the Red, Green, Blue and Clock high- speed digital graphic signals and copper wires for the low frequency DDC / HDCP control signals, wrapped in a PVC jacket.
Length: 10 meter / 33 feet
Part Number: M1-1P0E-010
|
|
Opticis Point to Point Hybrid DVI Cable - 20m/68ft (M1-1P0E-020)
The M1-1P0E-020 DVI extension cable is a new member of the Opticis family of products that stretches your digital visual interface connectivity. The M1-1P0E-020 is a hybrid cable solution using four H-PCF (Hard-Polymer Clad Fibre) or multi-mode glass fibers for the Red, Green, Blue and Clock high- speed digital graphic signals and copper wires for the low frequency DDC / HDCP control signals, wrapped in a PVC jacket.
Length: 20 meter / 68 feet
Part Number: M1-1P0E-020
|
|
Opticis Point to Point Hybrid DVI Cable - 30m/98ft (M1-1P0E-030)
The M1-1P0E-030 DVI extension cable is a new member of the Opticis family of products that stretches your digital visual interface connectivity. The M1-1P0E-030 is a hybrid cable solution using four H-PCF (Hard-Polymer Clad Fibre) or multi-mode glass fibers for the Red, Green, Blue and Clock high- speed digital graphic signals and copper wires for the low frequency DDC / HDCP control signals, wrapped in a PVC jacket.
Length: 30 meter / 98 feet
Part Number: M1-1P0E-030
|
|
Opticis Point to Point Hybrid DVI Cable - 50m/164ft (M1-1P0E-050)
The M1-1P0E-050 DVI extension cable is a new member of the Opticis family of products that stretches your digital visual interface connectivity. The M1-1P0E-050 is a hybrid cable solution using four H-PCF (Hard-Polymer Clad Fibre) or multi-mode glass fibers for the Red, Green, Blue and Clock high- speed digital graphic signals and copper wires for the low frequency DDC / HDCP control signals, wrapped in a PVC jacket.
Length: 50 meter / 164 feet
Part Number: M1-1P0E-050
|
|
Opticis Point to Point Hybrid DVI Cable - 100m/328ft (M1-1P0E-100)
The M1-1P0E-100 DVI extension cable is a new member of the Opticis family of products that stretches your digital visual interface connectivity. The M1-1P0E-100 is a hybrid cable solution using four H-PCF (Hard-Polymer Clad Fibre) or multi-mode glass fibers for the Red, Green, Blue and Clock high- speed digital graphic signals and copper wires for the low frequency DDC / HDCP control signals, wrapped in a PVC jacket.
Length: 100 meter / 328 feet
Part Number: M1-1P0E-100
|
|
 Opticis DVI Matrix Router 8x8 (ODM88)
The ODM88 enables you to make cross-switch between 8 DVI sources from host computers in far locations and 8 digital displays by using not only general PC software like Hyperlink terminal (serial communication) or web browser (LAN) but also Opticis’ dedicated software in our shipping group. Easy programming feature is accomplished in various manners such as manual input of front-panel key button or PC programming with various interfaces of RS232C, USB, and Ethernet.
|
|
Opticis DVI Extension Information:M1-1P0 point-to-point hybrid cable is designed to transmit graphic data over fiber, but interconnect DDC and DC power for the transmitting and receiving modules over copper wires.
M1-1000 point-to-point fiber cable implements DDC/HDCP interconnection as well as 4 channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology, using 8 fibers cable.
M1-100A point-to-point fiber cable implements 4 channel graphic data (Red, Green, Blue, Clock) into fiber-optic technology and OPTICIS unique Virtual DDC, programming with a programming kit, Opticis has specified. (Call 1-877-446-8947 for Pricing and Availability)
M1-201SA fiber detachable module adopts two duplex LC patch cord fibers to transmit only 4 channels graphic data with self EDID programming feature.
M1-2R2-TR fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as two duplex LC patch cord fibers to transmit the graphic data.
M1-2R2VI-DU fiber/copper detachable module adopts RJ-45C UTP cable for DDC/HDCP interconnection as well as four duplex LC patch cord fibers to transmit Dual DVI signal.
M5-2000/2001 fiber optic DVI transmitter and repeater modules make DVI daisy-chain over multi-mode LC duplex patch cord. (Call 1-877-446-8947 for Pricing and Availability) |
Opticis Two-Fiber Detachable DVI Extension Module (M1-201DA-TR)